Action is required to ensure scheduled temporary access codes remain active after the 31st of December.
Locks Affected: Halo Touchscreen, Halo Keypad, Aura
Thursday, December 19th: 7 am – 10 am PST
Monday, December 23rd: 7 am – 2 pm PST
Tuesday, December 24th: Closed
Wednesday, December 25th: Closed
December 26th – 28th, & 30th: Regular business hours
Tuesday, December 31st: 7 am – 2 pm PST
Wednesday, January 1st: Closed
Normal business hours will resume on Thursday, January 2nd
Please note that our call center hold times and email response times are longer than usual after holiday closures.
Support
Venetian Bronze
Satin Nickel
Note: Do not use prints from this website to mark distances. Due to individual printers, dimensions on installation instructions may not print at an accurate scale.
Obsidian will notify you of low batteries with audio and visual cues at three different low battery levels.
Read MoreObsidian has a set of 9V battery terminals underneath the touchscreen. If the batteries on the inside die, simply touch a 9V battery to the outside terminals and maintain contact through the following steps:1. Wait for the screen to light up2. Enter a valid user code3. Wait for the motor to retract the deadbolt4. Once inside, immediately replace the batteries.
Read MoreObsidian will remain in its last known state when the batteries were exhausted
Read MoreNo, auto-lock is triggered based on when it was last unlocked.
Read MoreBy default, SecureScreen is enabled but you can disable it if you really want to (although it’s not recommended) by flipping dipswitch #4 to the OFF position.
Read MoreNo, the time interval is set to 30 seconds, but you can choose to enable or disable this feature.
Read MoreThe Obsidian deadbolt will give you three attempts before locking-out the screen for 60 seconds. After 60 seconds, you can make additional attempts. Each three consecutive failed attempts will result in the screen locking out for 60 seconds.If you forgot your user code, there are two options:1. Add new user codes. (For detailed instructions on how to add new user codes please see the installation guide).2. Reset Obsidian to factory settings to clear existing user codes and add new ones. For detailed instructions on how to reset Obsidian to factory settings, please see the installation guide.
Read MoreThe Obsidian deadbolt is powered by 4xAA batteries. For best performance, we highly recommend alkaline batteries from a major brand. Do not use re-chargeable or lithium ion batteries.
Read MoreAmber indicates locked. Green indicates unlocked. Red indicates low battery.
Read More
