How to restore default settings on my Signature Series or SmartCode Deadbolt? Perform a factory reset
Factory ResetA factory reset will restore the lock to factory default settings and if the lock is paired to a smart home it will remove the lock from your smart home system.
1. Remove battery pack.
2. Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.
3. Press the Program button once more. When the LED flashes green and you hear two beeps, the lock has been reset.
4. Perform the door handing process again to teach the lock the orientation of the door.
5. IF LOCK IS A HOMECONNECT LOCK: Perform the inclusion process again to add the lock back into your network and controller.